Echosounder version 1.4 vs. 1.5

What is the difference between the echosounder versions 1.4 and 1.5?

Here is the new stuff in V1.5:

• In BARCHECK mode Timegate is locked around the bar
• In BARCHECK mode Blank result if depth falls outside the Timegate
• Echo approval time is processed, depending on settings
• BarCheck mode selected: = Approval/2
• If Range = 5m and RX = 0 or 1: = Approval/2
• Corrects an error in GT command.
• Disable display channel 2 when operating NS200 in single mode
• New default values
• Initial lockout: Ch1 = 60cm, Ch2 = 120cm
• Start NS215 and 415 in MUX mode
• NS215 and 415 Recorder mode is 1/2
• Force Communication to NMEA in a NS205
• Use high paper speed when printing settings
• Values and steps of Feet mode is changed
• Revised the AUX function
• Added, a Mark function to print Depth with AUX data
• Added, a after stripping the AUX input
• Rescheduled AUX repeater priority to be concurrent with Com port
• Corrected a buffer overflow error in AUX input
• Corrected an error that always recorded Channel 1 if TimeGate lines were activated
• Retro Implement LED blinking in V1.5.2++ to make it compatible with the new gray display foils